# ssh-conduit configuration

#
# This file is based on the current x11vnc settings and can be used as
# as a ~/.x11vncrc defaults file.  If saved to another filename, these
# settings can be passed to x11vnc at startup via "-rc <filename>".
#
# The rc file comment character is "#".  Use "\#" for the literal char.
# You can continue lines using "\" as the last character of a line.
#
# Lines beginning with "#d" indicate the parameter value is at its default
# setting and you probably want to leave it commented out.
#
# Lines beginning with "#?" indicate parameters you probably do not
# want to hardwire to the current setting (uncomment if you want that).
# 
# Some parameters are boolean, e.g. -forever, and take no value; while
# the others, e.g. -wait 50, take a string or numerical value.
#
# For booleans, the line will end with comment "default: on" or
# "default: off" indicating the default setting.  (Note: often
# "-nofoobar" corresponds to option "-foobar" and the former is
# "the default", e.g. -norepeat).
#
# For string or numerical options, the value "" in a line below
# means the default is unset and you will need to supply some non-empty
# value to use the parameter.  For reference, if the default differs
# from your value it placed at the end of the line as a comment.
# 
# Feel free to uncomment or comment any of the lines or to change any
# of the values of the parameters.  Don't be surprised that most if not
# all of the lines below are commented out (x11vnc has so many parameters,
# most of them will be at their default values).
#-------------------------------------------------------------------------

#d -24to32			# default: off
#? -6				# default: on
#d -8to24			# default: off
#d -accept ""
#d -add_keysyms			# default: on
#d -afteraccept ""
#d -allinput			# default: off
-allow 127.0.0.1
#d -alphacut 240
#d -alphafrac 0.330000
#d -alpharemove			# default: off
#d -always_inject		# default: off
#d -arrow 1
#d -auth ""
#d -autoport 0
#d -bg				# default: off 
#d -blackout ""
#d -buttonmap ""
#d -capslock			# default: off
#d -chatwindow			# default: off
#d -clear_all			# default: off
#d -clear_keys			# default: off
#d -clear_mods			# default: off
#d -clientdpms			# default: off
#d -clip ""
#d -connect ""
#d -cursor most
#d -cursor_drag			# default: off
#d -cursorpos			# default: on
#d -dbg				# default: off
#d -debug_grabs			# default: off
#d -debug_keyboard		# default: off
#d -debug_ncache		# default: off
#d -debug_pointer		# default: off
#d -debug_scroll		# default: off
#d -debug_sel			# default: off
#d -debug_tiles			# default: off
#d -debug_wireframe 0
#d -defer 20			# default:  20
#? -desktop testbed3:0.0	# default:  ""
#? -display testbed3:0.0	# default:  ""
#d -enablehttpproxy		# default: off
#d -enc ""
#d -extra_fbur 1
#d -fixscreen ""
#d -flashcmap			# default: off
#d -flipbyteorder		# default: off
#d -forcedpms			# default: off
-forever			# default: off
#d -fs 0.750000
#d -fuzz 2
#d -gaps 4
#d -gone ""
#d -grabalways			# default: off
#d -grabkbd			# default: off
#d -grabptr			# default: off
#d -grow 3
#? -gui tray=setpass		# default:  ""
#d -http			# default: off
#d -httpdir ""
#d -httpport 0
#d -https -1
#d -httpsredir 0
#d -id 0x0
#d -input ""
#d -input_skip 10
-listen localhost
-localhost			# default: off
-logfile /var/log/ssh-conduit-x11vnc.log	# default:  ""
-loop2000
#d -maciconanim 450
#d -macmenu			# default: off
#d -macnoresize			# default: off
#d -macnosaver			# default: off
#d -macnoswap			# default: off
#d -macnowait			# default: off
#d -macwheel 5
#d -modtweak			# default: on
#d -nap				# default: on
#? -ncache			# default: on
#d -ncache_cr			# default: off
#d -ncache_keep_anims		# default: off
#d -ncache_no_dtchange		# default: off
#d -ncache_no_moveraise		# default: off
#d -ncache_no_rootpixmap	# default: off
#d -ncache_old_wm		# default: off
#d -ncache_pad 0
#d -noalphablend		# default: off
#d -nobell			# default: off
#d -noclipboard			# default: off
#d -nocursorshape		# default: off
#d -nodpms			# default: off
#d -nodragging			# default: off
#d -nofb			# default: off
#d -nofbpm			# default: off
#d -noipv4			# default: off
#d -noipv6			# default: off
#d -nolookup			# default: off
#d -noprimary			# default: off
#d -norepeat			# default: on
#d -nosel			# default: off
#d -noserverdpms		# default: off
#d -nosetclipboard		# default: off
#d -nosetprimary		# default: off
#d -noshm			# default: off
#d -notruecolor			# default: off
#d -noultraext			# default: off
#d -nowait_bog			# default: off
#d -noxfixes			# default: off
#d -noxrecord			# default: off
#d -onetile			# default: off
#d -overlay			# default: off
#? -overlay_nocursor		# default: off
#d -padgeom ""
#d -passwd ""
#d -passwdfile ""
#d -pipeinput ""
#d -pointer_mode 2
#d -progressive 0
#d -proxy ""
#d -quiet			# default: off
#d -rawfb ""
#d -readtimeout 20
#d -reflect ""
#d -remap ""
-rfbauth /etc/ssh-conduit/x11vnc/passwd
#d -rfbport 5900
-rfbversion 3.8
#d -rfbwait ""
#d -rotate ""
#d -safer			# default: off
#d -scale ""
#d -scale_cursor ""
#d -scr_area 60000
#d -scr_inc \#\#Nomatch
#d -scr_keyrepeat 4-20
#d -scr_keys ""
#d -scr_parms 0+64+32+32,0.02+0.10+0.9,0.03+0.06+0.5+0.1+5.0
#d -scr_skip \#\#Soffice.bin,\#\#StarOffice,\#\#OpenOffice
#d -scr_term term
#d -sb 60
#d -scrollcopyrect always
#d -seldir ""
#d -setdefer 1
#d -shared			# default: off
#d -shiftcmap 0
#d -sid 0x0
#d -sigpipe ""
#d -skip_dups			# default: off
#d -skip_keycodes ""
#d -skip_lockkeys		# default: off
#d -sleepin ""
#d -sloppy_keys			# default: off
#d -slow_fb 0.00
#d -snapfb			# default: off
#d -solid			# default: off
#d -solid ""
#d -speeds ""
#d -ssl				# default: off
#d -ssl ""
#d -ssldir ""
#d -ssltimeout -1
#d -sslverify ""
#d -stunnel			# default: off
#d -stunnel ""
#d -threads			# default: off
#d -tightfilexfer		# default: off
#d -timeout 0
-ultrafilexfer			# default: off
#d -unixpw			# default: off
#d -unixpw ""
#d -unixpw_nis			# default: off
#d -unixpw_nis ""
#d -unsafe			# default: off
#d -usepw			# default: off
-users guess=
#d -viewonly			# default: off
#d -viewpasswd ""
#d -visual ""
#d -vncconnect			# default: on
#d -wait 20			# default:  20 
#d -wait_ui 2.00
#d -wirecopyrect always
#d -wireframe			# default: on
#d -wireframe 0xff,2,0,32+8+8+8,all,0.15+0.30+5.0+0.125
#d -wmdt ""
#d -xd_area 20000
#d -xd_mem 1.000
#d -xdamage			# default: on
-xinerama			# default: on
-xkb				# default: off
-xrandr				# default: off
#d -xrandr ""
#d -xrefresh 0.00
#d -xtrap			# default: off
#d -xwarppointer		# default: off
#d -zeroconf			# default: off

